FT530 Shipek Grab

The FT530 Shipek Grab is designed to sample all types of unconsolidated sediments, from soft ooze to small pebbles, which can be collected from near offshore and deep lakes.

The robust centre-pivot sampler can recover virtually undisturbed and unwashed to the surface from any depth.

The main use for the Shipek Grab is for sampling benthic organisms living at or immediately below the water and for sediment containing a major populace of non-sessile forms.

This grab samples 0.05m2 area, with a sample volume of 4 litres and it weighs 80kg

If you have any questions, get in touch with the team today.

How does a Shipek Grab work?

As the Shipek grab comes into contact with the sea floor, the trigger weight releases the helical springs causing the sediment bucket to rotate by 180° and scoop up the sediment sample. Once the bucket has rotated, it remains closed by the residual torque of the same helical springs, thereby protecting the sediment sample.

The rotation of the bucket is quick and penetrates the sediment cleanly, particularly if sampling clays, muds, silts or sands. Once closed, the sample is completely enclosed, therefore preventing washout during retrieval to the surface. Samples can be retrieved even if obstructions prevent the bucket from closing properly. Once recovered to deck, the bucket is simply removed by operating two retaining knobs. The sample is then processed as required.

E7D 6404
Right Sidebar Icons 1

Product Highlights

  • 4 litre capacity
  • 0.05m² sample area
  • Suitable for deep lakes and near offshore
  • Sampling for benthic organisms
  • Available from stock
  • Virtually maintenance free
  • A-frame or crane deployable
  • Spares and consumables in stock
  • Marine 316 A4 grade stainless steel
  • 80kg weight total

Bespoke Solutions

Using the latest techniques, we can deliver bespoke solutions for your next subsea challenge. We have designed equipment that has been used on seabed frames, sent downhole, attached to buoys and masts, or towed behind vessels.

Whether the solution requires electrical, electronic, mechanical, hydraulic or simulation techniques, Feritech have the experience and skills to take on any project in the marine industry (or indeed, onshore).

Please contact us to discuss your ideas and to find out more.